The following products are known to require a MIDI adapter: Use the black and white MIDI adapters provided with the MX4 to connect to the MX4 jacks, then use the appropriate MIDI adapter to connect to the external device. Instead, these products can be connected by means of a pair of MIDI adapters. Products that use an alternative signal mapping for the minijack connections cannot use standard patch cords/stereo minijack cables. Novation products (such as Launchpad Pro).Products Compatible with the Stereo Minijack Cables Or would be, if you think that repurposing the same cable This means they don't conflict with MIDI in any way. Termination? Near as I can tell it's for sync output. So what the heck is the Arturia adapter with the black 3.5mm Would need a different adapter to MIDI DIN-5. Opposite! So if you were going out of a 3.5mm MIDI socket on a Korg device, you Do not be surprised when I tell you that Korg has done the This is the standard adopted by Novation, Arturia, and IK DIN pin 4Ĭonnects to the Tip and pin 5 connects to the Ring. The grey cable is designed for MIDI output. The other ends areĬolour-coded because they are meant for entirely different purposes. It can be coupled with a standard MIDI DIN cable. (A black male MIDI connector is included forīoth of the white adapters have a female MIDI DIN plug, so When you purchase an Arturia Beatstep Pro, you get two whiteĪdapters as pictured below.